Instructions for use Zodiac PVC glue (2-component) - Z7096
Use Zodiac PVC adhesive, a two-part glue, for professional repairs to your Zodiac inflatable boat or RIB. Follow the steps below carefully for a strong bond.
Important conditions when bonding
- The temperature of the room in which the gluing will take place must be between 20° and 25° .
- The humidity should not exceed 70% .
Mix the glue and hardener well according to the ratio on the packaging.
Mixing ratio: 5–7% harder than the adhesive
(e.g. 125 ml glue + 7.5 ml hardener, or 250 ml glue + 15 ml hardener)
Preparing for the repair
- Cut the patch (PVC repair adhesive) to size. TIP : If possible, always round the corners of the patch for a better result.
- Using a white pencil or silver or green ink pen , trace the outline of the area to be repaired on the boat.
⚠️ Don't use a blue-writing pen! - Degrease the patch and the marked area on the boat with special CLEANER (no acetone!).
Degrease only the marked area on the boat.
Gluing instructions
- First coat: Apply a thin layer of adhesive to both surfaces using long, straight strokes. Let dry for 5–10 minutes.
- Second coat : Repeat the adhesive application and let dry again for 5–10 minutes.
- Third coat: Apply another thin layer and let it dry for 10 minutes. The adhesive should no longer feel sticky.
Then apply the patch to the boat and press firmly from the center outward with a blunt object. Alternatively, you can use the special stainless steel pusher .
Clean the adhesive residue immediately with the special cleaner and then clean the edges of the
Press the patch firmly again.
After this , let it dry for at least 24 hours at a constant temperature. The boat should not come into contact with water again until after 72 hours.
Important warnings and tips
If the glue turns white, you cannot continue gluing.
The cause is usually due to an ambient temperature that is too low or humidity that is too high.
TIP!
When repairing an air leak, deflate the boat/float before starting repairs.
After this, do not inflate the boat for 24 hours to allow the glue to dry.
Download glue instructions
Would you like to download these instructions for PVC rubber boat glue?
Click here for the gluing instructions for Zodiac PVC glue for inflatable boats.
Still have questions?
Do you have any questions about repairing your inflatable boat with Zodiac PVC glue?
Please feel free to contact us via the contact form, we are happy to help you.
